Nelsen Water Softener Double Tank 2.0 cu 64k, 3/4", 12-48 resin tank

Nelsen Water Softener Double Tank 2.0 cu 64k, 3/4", 12-48 resin tank
Call for current pricing
Our PriceUS$0.00
Retail Price US$1,429.99
CodeMT56/16MB-64B 45488F
Weight 1
Save wishlist

Includes Fleck 5600 control valve. Fleck's 5600 has enhansed the operating performance of over a million water treatment systems. It's user friendly and easy to program. List price $1429.99 Now only ---Call for price

  • Performance water softener. 2.0 cu 64k, 3/4". Available in 1".
  • Almond or Blue color
  • 10 year tank warranty.
  • 5 year on Fleck Body.
  • Electronic demand system

Electronic control valve and turbine meter allow the unit to regenerate on demand, saving water and salt. Distributor assembly lifts the resin bed and spins it to loosen dirt and debris, keeping the resin bed clean and reducing the need for maintenance. Larger distributor basket allows dirt and debris to wash to drain, minimizing pressure drop. Full flow bypass allows greater flow rates at a lower pressure drop. Flanged control valve to tank connections reduce leak points and insure that connections line up every time. Salt grid traps dirt and debris away from brine draw area and allows the uses of any type of salt, lowering the cost of operation over the lifetime of the unit. Safety brine valve prevents brine overflow in the event of a powElectronic control valve and turbine meter allow the unit to regenerate on demand, saving water and salt. Distributor assembly lifts the resin bed and spins it to loosen dirt and debris, keeping the resin bed clean and reducing the need for maintenance. Larger distributor basket allows dirt and debris to wash to drain, minimizing pressure drop. Full flow bypass allows greater flow rates at a lower pressure drop. Flanged control valve to tank connections reduce leak points and insure that connections line up every time. Salt grid traps dirt and debris away from brine draw area and allows the uses of any type of salt, lowering the cost of operation over the lifetime of the unit. Safety brine valve prevents brine overflow in the event of a power outage.

Features

Includes backwash valve, a $60.00 value, plus:

  • Two tank system
  • Regeneration based on totalized flow - provides salt savings and higher efficiency
  • Uses salt or potassium chloride crystals (potassium chloride crystals add no salt to your drinking water).
  • Rated service flow rate (gpm) 10
  • Pressure drop at rated service flow rate (psi) 10
  • Rated softening capacity (grains/pounds of salt)
    • 15,600 @ 3. 0
    • 26,700 @ 6. 0
    • 30,000 @8. 1
  • Rated efficiency (grains /pounds of salt at minimum salt dose) 5,290 @ 3. 0
  • Resin / media quantity 100 cu. ft.
  • Min - max working pressure 20 - 125 psi (138 - 861 kpa
  • Min - max operating temperature °f 40 - 120
  • Max. flow rate (gpm) to drain during regeneration cycle 2. 0
  • Simple setup - hardness and time of day are all that's needed
  • Program settings are stored permanently - settings are not lost during power failures
  • Time of day capacitor back up - time is saved for up to six hours without power
  • Digital error codes - provides troubleshooting assistance
  • Microprocessor shielded from interference - provides reliable operation.
  • Cabinet configuration
  • Control type - Demand
  • Valve size / Type - ¾" single disk
  • Resin tank Size - 10 x 48" (
  • Resin / media quantity - 1.25 cu. ft. (.035 m)
  • Capacity @ salt dose - 30,000 Grains @ 8.5 Lbs (3.86 kg)
  • Nominal service mode -8 gpm (30.3 Lpm)
  • Backwash flow - 2.0 gpm (7.6 Lpm)
  • Pressure range - 20 - 125 psi (138 - 861 kpa)
  • Shipping weight - 124lbs (56 kg)

 

No recommended products at the moment.
No recommended products at the moment.