WHOLE HOUSE BACKWASH FILTER SYSTEM WITH KDF & CHLORAMINE (AMMONIA) REMOVAL

WHOLE HOUSE BACKWASH FILTER SYSTEM WITH KDF & CHLORAMINE (AMMONIA) REMOVAL

Our PriceUS$979.00
Retail Price US$1,325.00
CodeWH 56/16AFB-10T
Save wishlist

NEW LOWER PRICE   SALE REGULAR PRICE $1325.00. NOW $979.00 
FILTER SYSTEM W/CENTAUR, KDF55 CANPRO/MEDIA GUARD W/FLECK 5600 VALVE
REMOVES CHLORINE, CHLORAMINES, LEAD, IRON, HEAVY METALS PLUS MORE. INCLUDES SPANNER WRENCH.
ADD 20" BIG BLUE HOUSING AND SEDIMENT FILTER CARTRIDGE FOR $134.99

Installation Instructions

Backwashing & Non-Backwashing Filters

Backwashing filters are simply a tank with a specific media designed to address a particular water problem and a control valve that automatically backwashes or backflushes on a pre-determined schedule.santé Inc. has a variety of backwashing filters designed to suit your specific application:

  • Granular Activated Carbon Filters - Removes Chlorine, chemicals and many other tastes and odors
  • ZeoRight Sediment Filters - Filters sand, silt and sediment to below 5 microns (replaces sand filters)
  • Catalytic Granular Activated Carbon Filters - Used to remoand used in and inFusion Systems for iron, manganese and sulfur removal.
  • pH Neutralizer Filters/Calcite - Adjusts the pH from low reading to neutral or above

Backwashing Water Filters Basics



A backwashing filter is a water filter that cleans itself periodically by rinsing away impurities it has filtered from water.

Although a backwashing filter may look like a water softener and be the same size, it's a different animal. Softeners are "ion exchangers", not filters.

A backwashing filter is a simple device that consists of a large tank called a "mineral tank" that is filled with a filtering substance called a filter medium. (The plural is media.) Water enters the top of the tank through a special control valve and passes downward through the medium, which removes impurities and holds them. Some media do not hold impurities, but cause a change to occur. Calcite, for example, dissolves and in the process increases the pH of acidic water. The treated water then enters a tube at the bottom of the mineral tank, passes upward through the tube (called a riser), and exits the filter via the control valve.

When the filter medium is saturated with contaminants, the control valve initiates a backwash. The backwash is an operation in which water passes backward through the filter at a rapid rate. It enters the tank at the bottom via the riser tube, and then passes upward through the filter medium, exiting at the top, via the control valve. The rapid upward flow, in addition to washing away stored impurities, fluffs and resettles the medium bed, preparing it for another filtering cycle.

Media

Filter media are selected according to purpose. Some of the most common are Birm (iron removal), Filter Ag (sediment removal), Calcite (increase pH of acidic water), KDF55 (chlorine and lead removal), KDF85 (iron and hydrogen sulfide reduction), Manganese Greensand (iron and sulfide removal), etc.

Some media have numerous applications, like the very useful and widely used GAC, or Granular Activated Carbon, which is used to remove chlorine, the by-products of chlorination, pesticides, herbicides, and chemicals in general. GAC, following proper pretreatment, also removes iron and hydrogen sulfide. It comes in various formulations made from a variety of materials (bituminous coal, coconut shells, wood, etc.), each with its own special properties. Centaur®, a specially processed version of GAC, is aimed at special problems like chloramines in city tap water and iron and hydrogen sulfide in well water.

How to Choose

Choosing a backwashing filter can be a simple or a complex issue.

Below is a brief problem-oriented suggestion list. It will give you a place to start.


City Water Problems

  • Chlorine/Chloramines and Taste/Odor

The standard medium for removal of chlorine, both free and combined, and for the enhancement of taste and odor in city tap water is granular activated carbon (GAC). Centaur®, a specially prepared carbon, is designed for effective removal of chloramine.

KDF55, an excellent long-term remover of free chlorine, is not effective against chloramine or combined chlorine. It is often mixed in small quantities with GAC to enhance its performance.

  • Fluoride Reduction

Unfortunately, there isn't a practical way to get significant, dependable fluoride reduction with a residential backwashing filter. Activated Alumina, the most commonly used medium for fluoride removal, requires very low flow rates and must be used in large quantities. These problems make it impractical for use in standard "whole house" filters.

Although reduction of fluoride by standard GAC is not claimed by manufacturers, the reality is that carbon often reduces fluoride. Although fluoride reduction by carbon filtration may depend on many variables (pH, mineral content of the water, etc.) that make performance uncertain, a good carbon filter is probably your best bet for fluoride reduction in city water. We can't promise it, but it often works.

  • Chemical Reduction

For general chemical reduction — removal of pesticides, herbicides, etc. — carbon (GAC) is the standard. Filter carbon is made from a variety of substances, the most common being bituminous coal. Coconut shell carbon is generally regarded as the medium of choice for the removal of chlorine, chlorinated solvents, or Volatile Organics. Centaur® carbon is specially prepared for the reduction of chloramine.

  • Hard Water

"Hardness" is an overabundance of calcium and magnesium. It is removed by a water softener, which is an ion exchanger, not a filter. Go here to see water softeners.


Well Water Problems

  • Iron Removal

You should not simply purchase a filter with "iron removal" media and expect it to solve you iron problems. Although a simple Birm filter is sometimes all that's needed, iron removal often requires pretreatment by chlorination or aeration or some other oxidization strategy. In many cases, a common water softener is a great iron removal tool. A free-standing birm filter will usually work quite well to remove a reasonably small amount of iron if your water has a pH of 7.0 or higher and there is sufficient dissolved oxygen in the water to be treated. If pH is low, an ordinary water softener may be your best choice for removal of small amounts of iron. A water test will help us determine what is best for your needs

  • pH Increase

Backwashing filters with calcite, or calcite combined with Corosex can increase the pH of acidic water to neutral. They can also remove sediment and, if the water is properly oxidized, they can also remove iron. Increasing pH is often necessary as a pretreatment for iron removal with aeration.

  • Hydrogen Sulfide Removal

Small amounts of hydrogen sulfide, the noxious gas that produces the "rotten egg" smell that wells are sometimes plagued with, can be removed by carbon filters and KDF/carbon combinations. If the problem is significant, you'll get best results by oxidizing the contaminant with aeration or chlorination before filtering with carbon.

  • Sediment

Most standard filter media (carbon, birm, etc.) will provide good filtration of larger particles, 20 microns and larger. Filter Ag is a particularly good medium, being light and easy to backwash. For the very best in sediment removal, Multi-Media filters, or filters using a natural Zeolite called ChemSorb, are superior. ChemSorb, if properly sized, can filter down to <5 microns.

  • Hard Water

"Hardness" is an overabundance of calcium and magnesium. It is removed by a softener, not a filter. It can also be "sequestered" by the feeding of phosphate into the water stream, greatly reducing its ability to damage plumbing fixtures.

  • Bacteria

Filters are not designed to make water contaminated with bacteria safe to drink. For that, you need a chlorination system or an ultraviolet system.


How Backwashing Filters Work BW Service Flow


Backwashing water filters are large tank-style filters that get their name from the fact that they clean and renew themselves by backwashing. Backwashing consists of reversing the flow of water so that it enters from the bottom of the filter bed, lifts and rinses the bed, then exits through the top of the filter tank.

The filter bed itself is a granular substance that is usually referred to as the filter medium. Media (media is plural, medium is singular) are numerous and varied. Common media are granular carbon, sand, garnet, anthracite, zeolite, granular manganese dioxide, and greensand. Many media are known by their brand names of the leading product in the category: Centaur, Filox, Birm, Filter Ag, and KDF, for example.

The picture above shows the filter in "service" position. This is how it works when it is doing the job it is designed to do. The unfiltered water enters from the left and is routed by the control valve into the filter tank. The water then filters slowly through the medium until it reaches the bottom of the tank where it is collected through a specially-designed sieved "basket" at the bottom of the center tube seen in the picture. The filtered water then passes up through the center tube, called a "riser" or a "dip tube," passes through the control valve, and exits the right side of the filter.

Note that there's a drain line in the picture, but no water goes through it during the filter's "service" function.

The Backwash

As the filter operates in the service mode, it traps and holds particles in the filter bed. Also, since water's nature is to follow the path of least resistance, after a time it begins to cut channels through the medium. As channels or holes in the media bed form, water begins to flow around rather than through the medium. This process is called "channeling," and it can reduce the effectiveness of the filter considerably. Backwash Flow


At a preset time, the control valve initiates a "backwash" to clean the medium of collected particles and to resettle the bed and eliminate channels that have formed.

The backwash is accomplished by sending water down the riser tube from which it enters the filter tank at the bottom. The force of the water is such that it actually lifts the media bed, swirling and tossing the granular medium. The water leaves the filter tank through the control valve, which routes it through the filter's drain line. Particles that were being held in the bed are washed to drain.

The backwash is an intense rinsing and tossing of the medium that lasts for several minutes. In a standard residential filter, a typical backwash lasts about ten minutes.

After the backwash, the control valve initiates a "rinse" of the bed during which water flows downward through the medium, up through the riser tube, and out the drain. The purpose of this rinse is to rinse and settle the bed and prepare it for return to service flow.

Incidentals about Backwashing Filters

Tanks. Called "mineral tanks," most are made of polypropylene and/or polyethylene with fiberglass reinforcement. Mineral tanks are very strong and usually guaranteed for up to ten years by the manufacturer.

Control Valves. Most modern filters use timer-style controls in which an electric timer initiates and controls the backwash of the filter at a pre selected time. Meters, which backwash the media when a certain number of gallons have been treated, are used widely on water softeners but much less frequently on filters. Some very sophisticated setups can initiate backwash in response to a pressure differential between the incoming and outgoing water, but for most situations, the standard, reliable timer control is preferred on backwashing filters.

Media. With a few minor modifications, a backwashing filter can serve many different purposes according to the filter medium used. Here are some of the more common granular media used in backwashing filters:

Granular Activated Carbon. For chlorine and chloramine reduction, taste/odor improvement, general chemical reduction. Carbon can also remove sediment and even iron if the iron is pretreated properly. It is the most commonly used medium for hydrogen sulfide reduction. Granular carbon is the preferred treatment for many chemical contaminants. It is perhaps the most versatile and universal of filter media.

Birm: For reduction of iron and manganese, under the right conditions. As iron media go, Birm is relatively light in weight and hence easy to backwash. It is also low in cost, so it's a popular iron medium although it has some drawbacks. A pH of at least 6.8 is normally required for Birm to remove iron.

Calcite: To increase the pH of acidic water. Calcite is a sacrificial medium that dissolves as it works and has to be replaced.

Centaur Catalytic Carbon: Reduction of chlorine, chloramine, hydrogen sulfide, and iron. A relatively expensive grade of specially prepared carbon, Centaur is a favorite for chloramine removal on city water systems.

Multi-Media, consisting of layers of such natural elements as garnet, sand, and anthracite: Used for the reduction of sediment and oxidized iron, multi-media filters are slowly being replaced by newer granular zeolite media.

Filter Ag, ChemSorb, Micro Z. These are all common "sediment" media. They reduce particles in water down to 20 to 5 microns. These are usually natural zeolite products.

Greensand. Reduction of iron and hydrogen sulfide. Greensand is usually used with a potassium permanganate feeder.

Filox. A natural mined mineral, Filox is known for high level iron removal and reduction of hydrogen sulfide odors. It is very dense and requires frequent and intense backwashing.

Backwash Rate. Backwash flow rates differ significantly from filter to filter.The correct backflow rate is essential to proper operation of a backwashing filter.The correct backwash flow rate is determined by considering the square footage of the surface of the media bed and the density of the media. The filter must have a flow control installed in the drain line to allow a backwash flow rate sufficient to raise and cleanse the media bed but restrictive enough to prevent media from being washed out the drain line. For example, a carbon bed in a 10" X 54" filter tank is usually installed with a five gallon-per-minute flow restrictor. Five GPM is sufficient to lift and clean the bed, but carbon is dense enough that it will not be washed out of the drain line during backwash. By contrast, KDF, a very dense medium, requires a backwash of more than 15 GPM in the same filter.

Service Flow. Service flow of the filter is limited by the size of the tank and the nature of the medium. Some media require longer to work than others. Media are rated according to the service flow they can support by a measurement called "empty bed contact time" in filter-maker jargon. When the recommended contact time for the medium is violated by excess service flow, the filter is less effective and the life of the medium is usually shortened. It should be noted that empty bed contact time requirements are frequently violated in residential filters. For example, filter carbon in a 10" X 54" filter has a performance limit of about 3 gallons per minute, but such filters are frequently used in residential applications with much higher flow rates. There is no great harm in this since the undersized filter removes most of the chlorine most of the time. However, if the same filter is used to reduce dangerous organic chemicals from well water, its upper service flow rate should be limited to perhaps one GPM, and exceeding this limit could have serious consequences.

 

No recommended products at the moment.
No recommended products at the moment.